LM 79 Testing
LM 79 Testing Laboratories – LED Test Laboratories
LM 79 Testing Lab, LM 79 Test Labs, LM 79 Test Laboratories, LM 79 Testing
Get introduced to the place which is best for LM-79 Testing Labs where you can have the best result for LM-79 Testing. Call on 08196980555 for LM-79 Testing laboratories
LM 79 Testing
As the development of LED technology continues to grow and diversify, the need for consistent and standardized testing procedures for LED has become more prevalent than ever. We have NABL and BIS Accredited testing for LM-79
We have made strides to stay current with the new testing standard LM 79 set forth by the Illuminating Engineering Society of North America. In addition, testing is now a priority when testing our LED light systems for more reliable results.
LM 79 Testing Laboratories
LM-79 is a method approved for taking electrical and photometric measurements of SSL products. We are providing you accurate LM-79 testing by experts in a very short period of time. LM-79 covers total flux, light output, electrical power, efficacy, chromaticity, and intensity distribution. The five required metrics on the LED Lighting Facts label come from LM-79 testing Laboratories’ results.
IES LM-79 Electrical and Photometric Measurements of Solid-State Lighting Products
An approved method describing procedures and precautions in performing reproducible measurements of LEDs:
- Total luminous flux
- Electrical powers
- Luminous Intensity distribution
- Efficacy (lm/watt)
- Chromaticity
What Is LM-79 Testing?
Everyone knows about it, in 2008, the Illuminating Engineering Society published LM 79, Approved Method for the Electrical and Photometric Measurements of SSL Products. LM-79 testing lab capture performance nature of products that feature SSL, including light emitting diodes LEDs.
LM 79 Testing Scope
Applies to LED-based products incorporating control electronics and heat sinks, that is, those devices that require only AC mains power or a DC voltage power supply to operate.
Who can perform testing?
LM 79 testing should be performed by Our Laboratory for the category of the product tested. Only reports from recognized laboratories are relevant. This standard is used for the Department Of Energy ENERGY STAR program qualification and lighting facts advocate program. All our product testing is performed according to LM 79 in a NABL and BIS recognized laboratory and reports are available upon request.
Why We Use LM-79 Testing Lab?
The LM-79 testing lab provides a snapshot of performance under specified operating conditions at some point in the life of a product, usually, at the beginning of the operation, these are referred to as initial measurements. It never addresses permanent ratings, changing performance over time lumen maintenance, or LED case temperature.
The LM 79 methods are really applicable to integrated LED products, such as luminaries and replacement lamps. It is not applicable to LED packages, modules, or arrays
- LM 79 is the method for testing electrical and photometric measurements of SSL lighting products.
- LM 79 contains procedures for performing reproducible measurements of LED properties, including total flux, electrical power, efficacy, and chromaticity.
- The scope of LM 79 Testing Laboratories applied to LED products that incorporate control electronics and heat sinks. This covers complete LED luminaries and integrated LED sources. It does not include bare LED chips or LED-based products without a light source.
Absolute Photometry Basis
- LM 79 requires complete luminaire testing
- Traditionally, photometric evaluation of lighting products is based on separate tests for lamps and luminaires relative
- For solid-state lighting products, LED lamps typically cannot be separated from their luminaire because of heat effects absolute
What Is Important Aspect Of LM-79 Testing?
LM 79 testing requires complete luminaries testing on an absolute photometric basis. Typically lighting products are evaluated on a relative photometric basis, where separate tests are done for lamps luminaries. However, for SSL products the LED lamps typically cannot be separated from their luminaries. The absolute photometric testing required measures the light distribution and light intensity of the complete luminaries.
In recent times, the term LM 79 Testing laboratories have become part of our lighting lexicon and has been treated in some cases as a lighting program all its own. While many lighting programs such as DLC and Energy Star reference LM 79 procedures, it is not in and of itself a lighting program with specified requirements and pass/ fails criteria.
However, the term LM 79 Testing Lab has come to generally be recognized as two distinct tests a candela distribution test with an IES file, and an integrating sphere test for a standard color CCT, CRI, Duv, chromaticity coordinates. Nevertheless, any time LM 79 is mentioned in reference to the desired testing, our staff will verify exactly what the customer requires since many measurement options are discussed in the official document.
Relative vs. Absolute Photometry
Relative testing Lamps of interest and luminaire with reference lamp are measured separately. Then the actual light distribution and intensity of the complete luminaire of interest is derived by normalization of the test data
Absolute testing The actual light distribution and intensity of the luminaire of interest are measured directly from the complete luminaire.
Why Choose Us?
We Are providing service to the client for the last 8 years with 100 % satisfied clients. Being NABL accredited, it is equipped with highly accurate machines, experienced and competent engineers. Customer satisfaction is the quality policy of the company. So, we are here to serve the clients in their testing requirements.
- Reasonable Price: Very competitive price, being one of the best on the market. Moreover, this price has no hidden fees.
- The quality of our support is unmatched: We take support one step further by tailoring our replies to suit your knowledge, expectations, and personality.
- We’re passionate about what we do: What sets us apart from the competition is that we’re passionate about the services we provide and the quality of support.
- Proven track record: We’ve gained a reputation as a reliable and honest company in the last 7 years with most of our customers coming from reference.
If Your Buyers Demanding for Street Light Testing – Contact Now!
Kindly send us the following Details, So that we can provide you with a quotation for the same:
- Product Name, Technical Specifications, and Brochure
- Product Images
- Total Number of Samples Required: 2
Wish this blog post will help. If you have any other questions, please feel free to contact us. Our team looking forward to working with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
Why Do We Need to LM 79 Test?
Why Do We Need to LM 79 Test?
LED is becoming so popular that it has replaced all other lightning sources like candescent lamp, CFL. Manufacturer have shifted to produce LED and making profits by selling low quality products in the market. This can deteriorate the LED business. LM 79 helps to access the LED by giving the photometric parameters and electrical parameters.
LM 79 focus on the absolute photometry, so it directly measures the total lumen of the complete lightning system including fixture, driver etc. LM 79 test report gives electrical and photometric parameter.
Photometric parameter: Luminous flux (lm), efficacy (lm/w), Luminous intensity distribution (candela), chromaticity coordinates, correlated color temperature (CCT), color rendering index (CRI)
Electrical parameter: voltage, current, frequency, power, power factor.
LM 79 Data enable objective product comparison and allows for evaluation relative to performance requirement.
If you’re Buyers Demanding for LM-79 Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
What are the limitations of LM-79?
What are the limitations of LM-79?
As we all know about the strength of LM 79. Everything has its pros and cons. Let us have a look on the drawbacks of LM 79.
- LM 79 depicts the parameters of the individual products. So the obtained Parameters cannot be used to access alike products.
- Other limitation is the sample size. It does not state any sample size. So, the manufacturer provides only one sample instead of supplying more. This thus increases the vulnerability of lesser quality products.
- This can be used only to determine complete luminary instead of LED used ( as based on absolute photometry) , which can produce different results due to quality of accessories used like glass, thermal effect, lenses etc.
If you’re Buyers Demanding for LM-79 Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
What is Relative Photometry?
What is relative photometry?
Total Lumen output of a bare lamp is measured in relative photometry for more clarity; the total luminous flux of the lamp is measured separately without the Fixture. In IES LM-80- 08, IES LM 82-12, the relative photometry is used. The purpose is to find light output, Efficacy, color over temperature for light engines.
Relative photometry can measures:
- Total luminous flux of the bare lamp
- Luminous intensity distribution
- Scale the luminous intensity values by the ratio of the measured lamp lumens to the rated lamp lumens.
Some important features regarding relative photometry:
- Relative photometry is performed for luminaries with conventional sources.
- Luminaries test is referenced to the luminous Flux measured for bare lamp.
- The result produced is in the units of candela per rated lumens( cd/rated lm)
- It can also measure the efficiency of luminary.
- Normalize ballast factor, Lamp age.
- Specific lamp performance doesn’t matter
Relative photometry is not used in SSL with integrated lamps due to many reasons:
- The LED‘s are difficult to remove from the Luminaries.
- A large number of LED devices will not work properly without heat sinks provided with luminaries.
- The thermal environment that the LED devices undergo within the luminary is often radically different from the thermal environment it will practice in its “bare lamp” configuration.
If you’re Buyers Demanding for LM-79 Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
What are LM 79 Test Outcomes?
What are LM 79 Test Outcomes?
LM-79 is approved test method for electrical and photometric measurements of Solid State Lighting Products. It describes the procedure in measuring total luminous flux, electrical power, luminous intensity distribution, chromaticity under standard conditions. It covers LED based SSL products with control electronics and heat sink incorporated with AC or DC power supply. This does not include LED chips, LED package or LED module but luminaries (fixtures incorporating light source) as well as integrated LED lamps.
The equipment used in LM-79 is integrated sphere and goniophotometer.
Integrating Sphere Goniophotometer
The test report shall list all significant data for each SSL product tested together with performance data. The outcomes of the LM-79 test are:
- Correction factor applied ( e.g. spectral mismatch, self absorption , intensity distribution etc.)
- Measured total luminous flux( lumen(lm)), input voltage(v), current(a), power(w), Luminous intensity distribution(cd), efficacy(lm/w)
- Color quantities( chromaticity coordinates, CCT, CRI )
- Spectral power distribution
- Bandwidth of spectoradiometer, if spectral distribution and/or color quantities are reported.
- Statement of uncertainties (if required)
- Deviation from standard operating procedures, if any.
Here is the link of a test report issued by our prestigious company. LM 79 Test Outcomes
If you’re Buyers Demanding for LM-79 Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
What is LM 79 Test methodology?
What is LM 79 Test methodology?
LM 79 is an approved method that describes the procedure to be followed and precautions to be observed in performing reproducible measurements of total Luminous flux, electrical power, luminous intensity distribution, chromaticity of Solid-State lighting products for illumination purposes under standard conditions.
LM 79 covers- LED based SSL products with control electronics and heat sinks. Luminaries (fixtures incorporating light source) as well integrated LED lamps.
LM 79 doesn’t cover– fixtures without a light source, SSL products that require external operating.
LM 79
Test method for total luminous flux Measurements:
The total luminous flux of SSL product shall be measured with an Integrating Sphere or Goniophotometer. The method may be chosen depending upon what other measurements quantities (color, intensity distribution) need to be measured., the size of SSL products, and other requirements.
The integrating sphere is suited for total luminous flux and color measurements of integrated LED lamps and relative small size LED luminaries. Advantage of using integrating sphere is that it does not requires the “ Dark Room”., and also it is less time consuming.
The Goniophotometer provides measurements of Luminous Intensity Distribution as well as total luminous flux. It can take measurements of larger size luminaries as well as small size luminaries. It has to be installed in Dark Room. Measurements in goniophotometer are time consuming.
| Integrating Sphere | Goniophotometer | |
| Conditions | No Dark room | Dark Room |
| Size of SSL | Small Size luminaries | Large size as well as small size Luminaries |
| Measurements | Total Luminous Flux | Light Intensity Distribution , Total Luminous Flux |
| Duration of Test | Fast Measurements | Time consuming as compared to Sphere photometer. |
If you’re Buyers Demanding for Luminaries Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
How LM-79 testing can help assess LED luminary quality and performance?
How LM-79 testing can help assess LED luminary quality and performance?
We all believe in buying quality products. Discovery of LED is boon to our world. LED has replaced all the traditional lightning systems because of its quality, life and performance. Manufacturers are switching from manufacturing traditional lightning to produce LED lighting. Many of the manufacturers are making unsubstantial claims regarding colour quality, luminous flux (lm), efficacy (lm/w) and general quality. This can Lead to LED degradation. To ensure quality, a series of test has to be performed on LED luminaries for its long term survival. This is served by LM 79 test method. It is not only the LED but the whole SSL has to qualify all the tests.
For special purpose, it may be useful to determine the characteristics of SSL products when they are operated at other than standard conditions described in the approved method.
Photometric testing includes measurements of total radiant flux, luminous flux, Efficacy (lm/w), chromaticity, correlated color temperature (CCT), and color rendering index (CRI), Light Intensity Distribution (cd). Radiant flux, expressed in watts, is a measurement of the total power of electromagnetic radiation (light) emitted from the luminary or lamp. Luminous flux is a weighted measurement based on human visual perception.
The above measured parameters help to access the LED luminary quality and performance.
ITC india Pvt Ltd is a leading company to test LM 79, company has both the highly accurate equipments “The Integrating Sphere” & “ The Goniophotometer” installed at its premises.
ITC india is a NABL accredited lab having full scope of LM 79( certificate no. T-3510.)
If you’re Buyers Demanding for LED Luminaries Lamps Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
Photometric Testing Experts
Searches related to Photometric Testing Experts, What is Photometric Testing, Photometric Test Procedure, Photometric Test Report, Photometric Testing India, LM-79 Testing Experts, Photometric Testing labs, LED Testing Experts, Photometric Testing for LED Lighting
If you are looking for Photometric Testing Laboratory for LED Lighting In your Area, ITCIndia Electrical Safety testing Laboratory Approved from NABL. ITC India one of the best Photometric Testing Laboratory in India, Mumbai, Chennai, Ahmedabad, New Delhi, Pune, Kolkata, Bangalore, Hyderabad, Surat, Visakhapatnam.
ITCIndia “Institute of Testing and Certification India Pvt. Ltd” are a leading testing lab having a NABL accreditation under ELECTRICAL, ELECTRONICS and PHOTOMETRY testing with certificate no. T-3509, T-3570 and T-1811. ITCIndia Lab is following the procedure as required by International Standard IEC 17025 and is already certified for ISO/IEC 17025.
As the development of LED technology continues to grow and diversify, the need for consistent and standardized testing procedures for LED has become more prevalent than ever. ITCIndia is NABL Accredited laboratory for Photometric Testing for LED Lighting, LM 79 Testing.
Institute of Testing and Certification India Pvt. Ltd has made strides to stay current with the new testing standard LM-79 set forth by the IESNA (Illuminating Engineering Society of North America). In addition, “ITCIndia” testing is now a priority when testing our LED light systems for more reliable results.
ITCIndia Lab has made strides to stay current with the new testing standard LM-79 set forth by the IEC/EN 60598. In addition, ITC INDIA testing is now a priority when testing our LED light systems for more reliable results. Fixtures tested by LM-79 standards will now feature a Lighting Facts label provided through the program created by the IEC/EN.
LM-79 Electrical and Photometric Measurements of Solid-State Lighting Products
Approved method describing procedures and precautions in performing reproducible measurements of LEDs:
- Total luminous flux
- Electrical powers
- Luminous Intensity distribution
- Efficacy (lm/watt)
- Chromaticity
How To do Photometric Testing?
Check Our Photometric Testing Scope
Absolute Photometry Basis
- LM-79 requires complete luminaire testing
- Traditionally, photometric evaluation of lighting products is based on separate tests for lamps and luminaires
- For SSL products, LED lamps typically cannot be separated from their luminaire because of heat effects
Relative vs. Absolute Photometry
Relative testing – Lamps of interest and luminaire are measured separately. Then the actual light distribution and intensity of the complete luminaire of interest is derived by normalization of the test data
Absolute testing – The actual light distribution and intensity of the luminaire of interest is measured directly from the complete luminaire.
For your better understanding, we are going to show you the Photometric Test report of latest LED in the following:
Learn more about this Photometric test >
If you’re Buyers Demanding for Photometric Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
What is the LM-79 Testing of LED Lights?
LM-79 Testing for LED Lights
LM-79 is an approved method for taking electrical and photometric measurements of SSL products. It covers total flux (light output), electrical power, efficacy, chromaticity, and intensity distribution. The five required metrics on the LED Lighting Facts label come from LM-79 testing results.
ITCIndia Offering you a complete choice of services which include LM 79 Testing, Safety Testing, Electrical Testing, IEC/EN/IS/BS/ISO Testing, IP testing as per IEC 60529 and Cable Gland Testing.
ITCIndia Laboratory has been awarded accreditation by the NABL under the Energy Efficient Lighting Products Program. This includes LM-79 accreditation for Solid State Lighting Luminaires – Total Flux Measurements (Luminous Efficacy) and Solid State Lighting Luminaires –Luminous Intensity Measurements.
Our accreditation also includes IES LM-80:2008 for Solid State Lighting Luminaires-Lumen Maintenance (SSL Life Tests).
ITCIndia laboratory is also on the LED Lighting Facts Approved Labs List.
ITCIndia can do safety testing against below international standard like
- IEC 61010-1 : lab instruments
- IEC 60204-1 : COntrol panel
- IEC 60595 : LED luminary
- IEC 61347 : Lamp control gear
- IEC 60950 : Information technology equipments
- IEC 60601 : Electromedical equipmets
- IEC 60065 : Audio video & similar product
- IEC 61439 : Low voltage switchgear & control gear assemblies
- IEC 60034 : rotating electrical machine and more contact us for more information…
LM-79 Definition and Scope
IES LM-79 is an approved method for testing electrical and photometric measurements of solid-state lighting products. LM-79 contains procedures for performing reproducible measurements of LEDs properties, including: total flux, electrical power, efficacy and chromaticity.
The scope of LM-79 applies to LED products that incorporate control electronics and heat sinks. This covers complete LED luminaires and integrated LED sources. It does not include bare LED chips or LED based products without a light source.
LM-79 testing requires complete luminaire testing on an absolute photometric basis. Typically lighting products are evaluated on a relative photometric basis, where separate tests are done for lamps an luminaires. However, for solid state lighting products the LED lamps typically cannot be separated from their luminaires. The absolute photometric testing required measures the light distribution and light intensity of the complete luminaire.
LM-79 Procedures and Conditions
- Ambient Conditions
- Maintain temperature at 25 degrees C +/-1 degree C (within 1M)
- Mounting – limit thermal transfer
- Limited air flow
- Power Supply
- AC waveshape limit to harmonic RMS of 3%
- Voltage regulation to +/- 2%
- Seasoning and Stabilization
- Testing Orientation
- Electrical Settings
- Instrumentation
LM-79 Testing Methods
Integrating sphere systems are used to measure the total luminous flux and color for LM-79. This can be performed with a photometer (total luminous flux) or a spectral radiometer (spectral radiant flux). Utilizing a spectral radiometer and integrating sphere is the preferred method, which derives total luminous flux and color qualities form spectral radiant flux measurements.
Goniophotometer systems are also used for LM-79 testing to measure luminous intensity distribution. The Goniophotometer system tests derive total luminous flux and provide color characteristics including CCT and CRI.
LM-79 Test Outputs and Calculations
- Total Luminous Flux
- Luminous Intensity Distribution
- Electrical Power
- Luminous Efficacy
- Chromaticity
- CCT
- CRI
For your better understanding, we are going to show you the LM-79 test report of latest LED in the following:
Learn more about this Lm-79 test >
If you’re Buyers Demanding for LM-79 Testing for LED Lights– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com
Get Instant Quotations, Fill the Enquiry form:
LM 79 Testing Report for LED Street Light 45W and 72W
LM-79 Testing and Certification Report for LED Street Light 45W and 72W
If you are looking for LM-79 Testing Report for LED Street Light 45W and 72W, ITC India Can Help You! ITC India NABL Accredited Laboratory one of the best Service Provider of Electrical Safety Testing, Luminaire Testing, LM-79 Testing, IP Testing, and etc..
ITCIndia discipline of Electrical (T-1811), Electronics (T-3509) and photometry (T-3510), serving its satisfied customers for last 5 years. Lab is fully equipped with the highly accurate Machines to test LM 79, IP Rating and etc. It owns Integrating sphere as well as Goniophotometer.
LM79 is an approved method for taking electrical & photometric measurements of SSL solid-state lighting products. It covers total flux light output, electrical power, efficacy, chromaticity, & intensity distribution. The five required metrics on the LED Lighting Facts label come from LM-79 testing results.
The Testing to be conducted is as follows:-
| S.NO. | PRODUCT | Testing as per standard |
| 1 | LED Street Light (45W) | Test to be conducted under LM 79:
A. Measurement of Total Luminous Flux and Luminous Efficacy
B. Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature and Color Rendering Index)
C. Light Intensity Distribution Test |
| 2 | LED Street Light (72W) | Test to be conducted under LM 79:
A. Measurement of Total Luminous Flux and Luminous Efficacy
B. Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature and Color Rendering Index)
C. Light Intensity Distribution Test |
- LM 79 Test Report will be on basis of 30 Mins to 2 Hrs Stablization Time depending upon the size of the Luminaire.
- Test Report of LM 79 with NABL Logo can only be issued for LED Lamps & Tube Lights only, for the following parameters: CCT, Color Coordinate, Luminous Flux (Lumen).
Popular Links of LM-79 Testing:-
- How to do LM-79 Testing?
- LM-79 Testing | LM-79 Test Approved Methods
- LM-79 Testing Report for LED lights, LM-79 Test Requirements & Procedure, lm 79 certificate
- LM-79 Testing for LED DownLight | LED Down Light Testing | LM 79 testing labs in India
- LED Luminaires Testing Services
- LM 79 testing for LED product
- LM-79 Testing Service in India
Electrical Safety Testing Lab 